Buy 12V Solenoid Water Air Valve Switch (Normally Closed) - 1/2

U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a high-quality brass body, 1/2 inch female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.

U.S. SOLID 1/2 NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON

U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a high-quality stainless steel body, two-way inlet and outlet ports with two inches (2) female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.

2 Solenoid Valve - 12V DC Stainless Steel Electric Solenoid Valve, Normally Closed, Viton Seal

12V DC Electric Solenoid Water Air Valve Switch – ielectrony

Beduan 2 Way Normally Closed DC 12V Electric Solenoid Air Valve 1

Brass Electric Solenoid Valve Switch Water Gas Air Dc12V 1/2

Solenoid Valve Water Normally Open 220v

High Pressure and most durable 12V Dc Valves

DC12V Solenoid Water Flow Control Valve G4 (1/2 inch

In an automatic transmission system, a shift solenoid is an electronically activated element which opens and closes some valves to control the transmission fluid flow from the gear shifts. Shift solenoids have a spring loaded plunger covered with a coil of wire. Through the wire, the plunger makes contact with the engine sensors through electronic signals. Those sensors indicate when transmission should shift gears according on speed.