Power over Ethernet (PoE) Injector

Reduce costs by using existing Cat5 cable to provide both power and dataThe Power over Ethernet Injector from Intellinet Network Solutions allows you

Deliver power and data to four Power over Ethernet devices using this wall-mountable PoE+ midspan hub. This Gigabit midspan PoE+ injector is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model. It supplies up to 30 Watts output to each port, so you can easily power and access up to four high-power PoE-compliant devices - such as IP cameras - using standard Ethernet cable.

StarTech.com 4 Port Gigabit Midspan - PoE+ Injector (POEINJ4G)

PoE Texas POE-8-48v120w | 8 Port PoE Injector for IEEE 802.3af Power Over Ethernet Devices | with 48 Volt 120 Watt Power

Gigabit Power Over Ethernet PoE+ Injector，Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters

Gigabit PoE Injector Adapter, PoE+ Injector 30W ，Gigabit Power Over Ethernet Plus Injector，10/100/1000Mbps IEEE 802.3af/at Compliant, Up to 100 Meters

Get power and data over your existing LAN cable. The Intellinet Network Solutions Industrial Gigabit High-Power connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.

Intellinet 561365 Industrial Gigabit High-Power PoE+ Injector

PoE Injector: 48V Gigabit Power Over Ethernet Adapter 1GB

POE-171A-95 Single-Port Multi-Gigabit 802.3bt PoE++ Injector (95 Watts) - Planet Technology USA

Intellinet Power over Ethernet (PoE) Injector (524179)

The ADC-POE-INJ is a POE injector used to power Alarm.com Cameras that support power over ethernet (PoE). This device is an ethernet pass-through

Alarm.com ADC-POE-INJ - POE (Power Over Ethernet) Injector

Keonn Power Over Ethernet (PoE) Injector with VAC Transformer

The TP-POE-48G, PoE Power Source offered by Tycon Power is a quality midspan power source for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the R model the voltage is reversed. 4,5(V-) and 7,8(V+).